Discussion Locked

Number of users of a network printer

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just bought a new high speed laser printer for our NT network which was to replace two slower ones. Unfortunately there seems to be a limit on the number of users who can connect at one time (10). Can anyone confirm this and if it is correct how do I work around it as I need to allow 21 users at a time?

7 replies

by isys

If it's connected to a print server running Windows NT/2000 Workstation, 10 is the max that can connect. You might try IP printing.

by bashful

Thanks for the info. It is an NT workstation that it is connected to so can you help me further and tell me how to set up IP printing?

by take_smile

Following to the massage of isys, see if you have install your printer on the workstation and you shared it then there is only 10 users limit, this is the Max limit to connect to any win NT/2000 workstation. So install the printer on the server give it IP address and share it. There is no number of limit.
Hope this will help you

by bashful

Unfortunately the server is in another room so it has to be connected to a workstation which acts as a print server. Any further help would be helpful.

by isys

Install a TCP/IP port on each workstation. Connect the printer to that port, and have the individual workstations print to that port. Then their print jobs will be sent to that printer.

by bashful

Thanks for the advice. I have resorted to buying a separate print station to solve my problems.

This discussion is closed to new replies.