Discussion Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm administrator of a small office network. We have a Sonicwall firewall SOHO3 and a cable connection to the Internet. We will setup a second connection (DSL). The idea is to use both connections, some protocols will use Cable and others will use DSL. How can I configure my network to use two internet connections with one firewall? Will need to use two routers?
2 replies
by georgevlob
Depends on your router. Cisco 1720 can support two WICs (Wan Interface Cards) as can the Netopia 7200R. I don't know if either has a cable interface card. If your router does not support multiple interface cards, then you will need two routers. I then becomes more complicated, but not imposible. You should try to work with your ISPs to provide a solution.
One solution to the problem, though not cheap, is a product made by Amplify.net called iSurfJanus-RX. you can read about it on their site www.amplifynet.com.
by wchuang
soho 3 only goes out on 1 ip address as gateway
try using addroute in firewall
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending
0 helpful
1 reply
0 helpful
6 replies
0 helpful
11 replies
Discussion Locked
How should organizations verify AI generated information before using it
0 helpful
0 replies
Discussion Locked
Which team communication software is used in corporates?
0 helpful
9 replies