10 replies
Greetings,
ADLink released PCIS-DASK/NT version 1.61 in December 1998. NuDAQ PCI cards with PCIS-DASK/ NT now can share IRQ and work well under Windows NT. This relieves the customers from the trouble of missing IRQs or IRQ conflicts, especially with an application needs several NuDAQ PCI cards.
If you need further information, contact: Mr. Alex Lee,
e-mail: alex@adlink.com.tw
You can read about this product by cutting and pasting this link:
http://www.adlink.com.tw/news/199901/p7.htm
(REMOVE SPACES if they snuck into the pasted URL)
Another article that I ran across, Understanding, fighting and avoiding The Dreaded IRQ Conflicts", may help as well:
http://dv411.com/irqguide.html
Good luck,
Maxwell
.
.
The above answer is assuming you need to have all of these devices available at the same time. Another thought I had, however, if you don't need them all at the same time, is to create different hardware profiles. Reboot the maching whenever you need a different set of hardware devices, selecting the appropriate hardware profile.
Regards,
Maxwell
by tehan1
by frobo
For Modems you can use an Digiboard, with an attched Blackbox with 8 Serial Ports. i have used one in an Project with 16 modems.
regards
Frobo
by tehan1
Don't know the answer.
However I am assuming the modems are to provide internet access.
In that case it's better to implement a dsl connection /leaseline and to use a internetsharing program (ms proxy server, wingate, winproxy, wintoute) to share the internet connection to the users.
Leopold
by tehan1
YOU HAVE MULTIPLE CHOICES.
1.- SETUP A DIGIVOX CARD OR BOX WHICH ALLOWS YOU UP TO EIGHT MODEMS, AND LET THE HARDWARE TO THE JOB.
2.- MOVE THE NT SOFTWARE TO XP, IT WILL SHOWS YOU AS MUCH AS 24 IRQ!!!
3.- ADD A NIC CARD TO THE UPS AND CONTROL IT VIA LAN
by tehan1
by tehan1
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending