over clocking

By garrycenit_0521 ·
hi! just want to know why is it a post like "over clocking failure,.press F1 to set-up bios or press F2 to continue and load set-up defaults" always pop-up every after my PC boots.?? any info is very much appriciated! thanks!

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

One of a couple of things most likely

by OH Smeg Moderator In reply to over clocking

The CPU speed is set wrong in BIOS. Even if the Speed is right the FSB & Multiplier may be wrong.

The CPU Fitted top the M'Board isn't supported by the M'Boards BIOS.

The BIOS Battery is flat and the BIOS Settings are not being held when you turn off the computer. Or if new the Jumper for the BIOS Battery is set to Disconnected to save the Battery till the M'Board is installed into a computer.


Collapse -

over clocking problem

by garrycenit_0521 In reply to One of a couple of things ...

hey,!thanks for the info!:) by the way,my PC specs are P4 2.4G,asus P4V8X-X socket 478 mobo,512PC400 DDR,128mb graphic card,.bro i already checked jumper setting and CMOS it possible to update my bios? bro thanks a lot!!

Collapse -

is it possible to update my bios?

by OH Smeg Moderator In reply to over clocking problem

Yes you can download the newest BIOS & Flashing Utility from here

The 1008 is the newest version though there are a couple of Beta Versions available but I wouldn't recommend them for production use.

If you need instructions on how to Flash the BIOS they are listed on the Left Hand Side under the tab called How To Upgrade Your BIOS.


Related Discussions

Related Forums