Discussion Locked

Past the log in screen, before the deskt

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Two problems:
1. Machine A - I have Win2K Pro installed. I installed SP2. Installation was successful, and I rebooted. Login screen appeared. I entered my user name and password and pressed enter. The log in screen accepted my credentials and I assumed I would see the desktop. However the PC just hung there - past the log in screen, but before the desktop. Has anyone see this before? Suggested solutions?
2. Machine B. Win2k installed. I installed a second drive. Installed WinXP on the second drive. I was able to log into XP, however when I tried to get into Win2K - same problem - I get past the log in screen, but then it hangs before the desktop. Help

13 replies

by tyrone

Have seen this a few times but it might be unrelated, try holding down CTRL ALT and ESC and then see if the desktop appears.

by camac

no dice - this didn't work, neither did Ctrl, Alt and Delete. I can't get taskmanager or nothin - just sits there - call the exorcist :)

by bobho

Can you startup in Safe Mode? If so, you probably have a driver problem. Check the devices and see if any are having problems (especially video and audio). They might have gotten messed up with the changes.

DrBob:>)

by camac

Dr. Bob, unfortunately I cannot get in through safemode either. In safe mode I enter my username and password at the logon screen. It accepts them and states "loading personal settings". But instead of it loading my desktop, it takes me right back to the logon screen! I need more help

by bobho

OK. Try this: get a win98 boot disk that has fdisk on it. Boot from the disk and type fdisk /mbr. This will re-create the master boot record of the hard drive. Try this first on the w2k pc. Remove the disk and reboot the machine. W2k will rebuild the mbr.

If that works you can try it on your w2k/xp also but I'm not sure what it will do to your xp setup. How are you booting up to xp on the 2nd hdd anyway (using boot magic or such?). When you installed xp I'm pretty sure it wrote out to the mbr on the c: drive and that is your problem with that pc's w2k startup.

Let me know what happens.

DrBob:>)

by camac

Dr.Bob...it worked!!! I am trying now to understand WHY it worked. If you could please write back and explain the MBR and WHY it worked the points are yours!!!

by joseph moore

Sounds like you are having a problem with EXPLORER.EXE the file that runs that creates the Desktop.
Try this.
Log into Win2K as normal.
When the blank screen comes up, press CTRL+ALT+DEL, and then click the Task Manager button.
Task Manager thencomes up.
Click on the Processes tab, to show the running processes.
Click File -> New Task (Run)
Type in EXPLORER and then click OK.

Hopefully, that should bring up the Desktop.

After this, I would run Service Pack 2 again (or go with Service Pack 3, since it is out)

hope this helps

by camac

Joe, unfortunately in that screen nothing works. Not CTRL + ALT + Esc. Not CTRL + Alt + del. Nothin. It's the wierdest thing. I logged in before I left last night and just left it at the "pergatory" screen and this morning when I came in, it's stillthere! I'm gonna try to find a Win98 boot disk, like Dr.Bob recommended, but we don't have any Win98 machines in our environment - anyone know if I can download the files and create one? What sites?

by camac

Thanks joseph, I got into bootdisk.com and downloaded the win98se disk and it worked

by bobho

I can't really say why the corruption occured on machine A. For some reason the sp2 installation wrote out incorrect information to your mbr. I have installed sp2 on many machines and have never had this problem so who knows.

Regarding machine B the most likely cause is the installation of winxp. Installing an operating system usually writes information to the mbr regarding the operating system and it probably tried to tell the mbr that it was on the 2nd disk, thus creating problems for w2k.

Here's a couple of links explaining what the mbr is and how it fits into the system startup:

http://www.pcguide.com/ref/hdd/file/structMBR-c.html

http://www.dewassoc.com/kbase/hard_drives/master_boot_record.htm

Here's a ms kb article on what fdisk /mbr does:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q69013

Enjoy,

DrBob:>)

by camac

Congratulations Dr.Bob, you've just won 300 points! Thank you very, very, very, very, very, very much! Now how do I give you the points?

This discussion is closed to new replies.