5 replies
by vincentcecelia Accepted solution
by robo_dev Accepted solution
You state you 'upgraded' the ram...did you replace the sticks you have, or add more?
With no ram installed and only the video card plugged in, does it pass post?
Make sure the mobo is not shorting to the case when it warms up.
At this point I would bet either faulty memory or video card, whether they are new or not. Something is heating up and going bad.
The memory should be easy to test just by taking half of it out and doing a test.
I've never seen it happen, but maybe your monitor is doing something bad to your video cards.
by vincentcecelia Accepted solution
I upgraded the ram sticks from 512MB to 1 GB sticks. I added 4 1 GB sticks instead of 2 512MB sticks.
I had one stick of RAM along with the other basic components and it froze at the Wndows Welcome Screen.
I figured it out. It was shorting on the case. Once I benched everything it worked fine. But there is a new problem, once I place all 4 RAM sticks in, the computer doesn't boot, it doesn't even post. It just doesn't work. I would like to know why? Also what is the best method for putting a motherboard back in the case in order to prevent shorting?
by ebouza Accepted solution
Have you tried booting into safe mode? I would also do what the previous response recommended taking out the memory one stick at a time and see if you can boot normally. Also check that the board is not shorting to the case.
Thanks,
Erick B
by vincentcecelia Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending