Discussion Locked

PCMCIA CARD HANGS NT AFTER BOOTING

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Xircom PCMCIA card model REM56G-100 installed on a laptop running NT Workstation 4.0
This card is giving me many problems and now that I have it installed, NT hangs at the Windows Logon Screen. I take the card out and NT boots fine. Card in and NT hangs. I hear the "beep" when PCMCIA recognizes the card, but I don't know why NT hangs. I need a super quick and effective response please.

6 replies

by karpi

Hi,

when the Card is a CardBus-Card (32bit) NT4 has problems using the Cards. For some Laptops there is a CardBus-Driver available.
But to test the Card use it in a another Laptop with Win98,ME,2000 or XP.

HTH
Karpi

by alienrasta

I have already read about this, but couldn't understand how to remedy the problem. The card works fine in WIN98. The laptop will not run W2K or XP so I am limited to NT. I need a resolution more than an explanation. Do you know how to go about this. I will offer more points if necessary.

by karpi

Hi,

when the Card is a CardBus-Card (32bit) NT4 has problems using the Cards. For some Laptops there is a CardBus-Driver available.
But to test the Card use it in a another Laptop with Win98,ME,2000 or XP.

HTH
Karpi

by alienrasta

Downloaded Cardbus Wizard from www.download.com
The wizard advised that there was an IRQ conflict. Changed IRQ settings and resolved the problem. I think the points cannot be awarded for a problem I fixed myself.

This discussion is closed to new replies.