Discussion Locked

Peer-to-peer Win9x to NT4 Workstation

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can a Windows ME print to a shared printer that is attached to a Windows NT workstation? They are hooked together with 10base hub, NetBEUI, File sharing service and MS Networking is installed on the ME. NetBEUI is installed on the NT WS. The WS has a global domain and has been a member of that domain. The printer has been shared by the NT. I can now see file shares on either system from the other. I can not see a printer. What are the steps for configuring peer-to-peer between ME and WS?

8 replies

by saihib

If the printer has been shared in ME you open printers, select add printer, tell ME that it's a network printer. You should be able to browse to the printer--\\sharename. And add the printer. You'll need to install the print drivers though.Make surefile and print sharing is installed on the NT machine.

by tomtowle

I said I am unable to "see" or browse the printer from ME. Additionally, I am unsure as to what you mean by making sure "file and print sharing" is installed on the NT machine.

I read something about making sure the "Logon to NT Domain" box in MS Client for Windows Service is unchecked. I also read something about making sure that Windows Logon is enabled as Primary logon rather than Microsoft Family Logon.

I would be interested in knowing how this affects pr2pr printing.

by vigo98

Here is what you should do:
First of all, remove Share from the printer on WS and share it back again. Check if you can see the printer from ME now.
If not I would suggest installing TCP/IP and tring to share the printer then.
If neither of thesework tell me please if you can print from any other computer to that printer?
Thanks, Victor

by tomtowle

I have already performed the Share/Unshare technique. It is a locally-attached parallel port printer without protocol settings so it will not hold an IP address. The printer works fine as a local printer for the NT4 workstation

by shepherr

On the NT box, go to the properties of the printer. Listed should be a tab for security. Make sure that 'everyone' has print capability. Then go to the sharing tab. and make sure that shared is checked, and a sharename is listed.
Then, on the MEbox, click, start, run, and type \\NTWSNAME\PRINTERSHARENAME. If it brings up the printjob box, then you are seeing the printer share. Also, you may need an account on the NTWS in order to access the resource.

by tomtowle

My usage dictates the following requirements:
1. The NT workstation machine at my house:
1a. - a dialup member of my domain at work,
1b. - a standalone desktop when not connected to work,
1c. - a networked member of my domain at work when returned to work
(e.g., for upgrade).
2. My little VAIO wants to be:
2a. - a networked member of my domain at work,
2b. - a dialup member of my domain at work (when traveling for work).

My home usage adds the following requirements:
3. The NT workstation machine at my house:
3a. - a networked member of a home domain or workgroup that can:
3b. - act as a print server for other networked computers at
home
3c. - share its files with other networked computers at home
4. My little VAIO wants to be:
4a. - a networked member of a home domain or workgroup that can:
4b. - print using the printer on the NT workstation
4c. - share its files with other networked computers at home

The success that we had last weekend was achieved by(in part) nailing down
an IP address for the NT workstation. Then I was able to share files between
the machines (requirements 3c and 4c). I was not successful printing on the
printer connected to the NT workstation from the VAIO (3b and 4b). With the
IP address nailed down, the solution satisfying requirements 1a and 1c was
disabled.

This discussion is closed to new replies.