Community archive

Ask something
Discussion Locked

Pulse Dial-Ambit conexant internal Modem

0 helpful
1 reply

by josephkl

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
My telephone line doesn't support Tone (DTMF) dialling. So I was trying to connect to my ISP by pulse dialling using the Ambit conexant internal modem of my Sony VIAO laptop.
I tried selecting the dialling option to 'pulse' but it didn't work.I tried prefixing the number with 'p' and 'p0', but no use.
Anyone got an idea of how to make my modem to dial in pulse mode?
Rgds
Joe

1 reply

by mark the phone man

You didnt say wheather it was trying to dial out in tone mode or not dialing out at all. If its still trying to dial out in tone mode after you have changed yoru modem settings in control panel to Pulse, and changed your dial string in your DUN setup. I would check sony for a modem driver setup. one more thing you can try is to use hyperterminal or procomm and dirct connect to the modem then enter in a dial string like ATDP XXX-XXX and see if you get an error back. If it dials when you direct connect its a problem with your isp's dialer program.

mark

This discussion is closed to new replies.