Question Locked

Putting a Gateway ATA/IDE 80G HD into SATA External Case

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok, please forgive me... here is what I have:

1) 80G Hitachi Travelstar 2.5" HD ATA/IDE from a Gateway laptop.

2) 2.5" SATA External Case USB 2.0

The case component that should hook up to the HD is not a match, so I am wondering if I am missing a component, have the wrong thing, or am just blind. Please go to http://www.barnesvilleareahelpers.org/dave/ for images (if needed) of the items I am talking about.

I would appreciate any help anyone can give.

Thanks,
David

4 replies

by sidekick

Sorry Dave, but if I am understanding you correctly, you are trying to connect an IDE hard drive to a SATA connector, which just can't be done. It's not just the connector shapes, it is the fact that different protocols, algorithms, etc, are used to read and writed data to the drive. It would be like trying to build a house with a Greek foreman and a Chinese worker.

Oh, and fyi, that link you posted gave me an empty directory.

by dtaylor143

Thank you sidekick. I thought that was going to be the issue. So what kind of external case to I need than? An IDE type?

Sorry about the directory, you must have hit it before it finished loading... my bad.

David

by oh smeg

The 3.5 Inch IDE Cases are different yet again.

What you'll need to watch with these drives is that different drives work slightly differently some need to have their Jumper set to Master and some require the jumper to be completely removed all together.

Col

This discussion is closed to new replies.