General discussion

Locked

RAS Callback problem

By t.kotoulas ·
I have already installed two years now a RAS server on NT that works just fine and with callback options. If i use my mobile phone in order to call the modem pool of the RAS, although the call is correct, on callback the server disconnects the mobile phone call and tries to callback. At callback the mobile phone rings but doesn't pick up the line. In diag logs i see the ATS0=0 line that means that it sees that the line is closed and no callback is waiting. The correct command should be ATS0=1. Although i put as extra command this one at the mobile modem properties, it keeps ignoring it and no callback feature is happening.
Please inform me about.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

RAS Callback problem

by pvw In reply to RAS Callback problem

Does your mobile shows DATA CALL when your server is calling ? If not, get a DATA number from your phone operator. Usually you have to pay a monthly fee for this.

Regards.

Collapse -

RAS Callback problem

by t.kotoulas In reply to RAS Callback problem

I already do this and on callback i place the data call number but again on receiving the call it recognizes the call as voice.

Collapse -

RAS Callback problem

by pvw In reply to RAS Callback problem

Hi, unless your mobile sees it as a datacall you will never be able to receive any data call's if Voice is on your mobile. You should check the modem from your server. Is this on an ISDN line ? or behind a PABX ?
There is nothing wrong from your mobile site but probably a configuration setting on the server side. (try a regular PSTN modem.)

Collapse -

RAS Callback problem

by t.kotoulas In reply to RAS Callback problem

Poster rated this answer

Collapse -

RAS Callback problem

by t.kotoulas In reply to RAS Callback problem

This question was closed by the author

Back to Other Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums