General discussion

Locked

RAS Problem

By zozuk ·
I have enabled RAS on our NT 4.5 server and we can log in get authenticated but we cna't see the network or drives on the server (we cna get in and that's all) I have checked every thing I canthink of an TechNet says nothing.
Thanks
Les

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

RAS Problem

by acattr In reply to RAS Problem

If your using IP only, you will need a wins server configured on your network. The reason being is that name resolutions with out a wins server are done by broadcasting. Broadcasting is not allowed via dialup. If you configure all your servers and clients to connect to a wins server. Then your remote dialup users will see every resource on the network.

Another alternative is to install NETBIEU(whatever) on both the dialup machine and dialup server. Also enable netbieu in the RAS settings and see if that works.

Collapse -

RAS Problem

by zozuk In reply to RAS Problem

Poster rated this answer

Collapse -

RAS Problem

by pankaj In reply to RAS Problem

Hi ,

Try to connect your remote PC with Netbeui protocol


Pankaj

Collapse -

RAS Problem

by zozuk In reply to RAS Problem

Poster rated this answer

Collapse -

RAS Problem

by zozuk In reply to RAS Problem

This question was closed by the author

Back to Windows Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums