Discussion Locked

Reducing monitor flicker rate?

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running Windows Me and although the computer runs fine, I get a lot of monitor flicker when in Dos prompts or playing Dos games. It really is quite annoying since in these situations the display not only flickers but "rocks" from side-to-side. Interestingly, the flicker rate is virtually unnoticeable/nonexistent to Win Me; it seems to be an exclusively Dos-related problem. My monitor has a max resolution of 70 Hz, but Windows Me seems to only be able to load either settings at 60 Hz or 75 Hz (but not 70 Hz). Any suggestions on how to reduce the flicker effect in Dos mode?

10 replies

by dwh co

Hi!

#1. Are all the cables secure?
#2. Have you "properly" installed latest video card drivers, and (though not usually required) monitor specific ".inf" files?
These items can be usually found at card/monitor manuf. sites.
#3. Does your monitor have settings that you can adjust?
#4. Lastly, you may want to tweak with the MODE.COM (or .EXE) command. Use START > FIND to locate in your WINDOWS folder.

http://www3.sympatico.ca/rhwatson/dos7/z-mode.html for MODE PARAMS

DWH Co

by dwh co

I've read arguments both PRO and CON about drivers. Whether they are MS or MANUF., 'usually', the latest drivers for a particular piece of hardware can be found at the MANUF. site. Generally, the ones that are installed with an OS, are 'certified' by the OS author...

Hope this helps further,
DWH Co

by galahad04

Thanks for your helpful suggestions. Although I was not able to eliminate the flickering, I was able to reduce most of it by increasing the refresh rate.

by galahad04

Thanks for replying! In response to your questions:

<<#1. Are all the cables secure?

Yes, after checking them they were securely connected.

<<#2. Have you "properly" installed latest video card drivers, and (though not usually required) monitor specific ".inf" files?
These items can be usually found at card/monitor manuf. sites.

Well after I upgrading to Windows Me, the new OS automatically installed newer versions of my monitor drivers (dated 6/8/2000) supplied by Microsoft. Would you recommend replacing these Microsoft-based drivers with drivers specifically from the manufacturer or my monitor -- or should I stay with the drivers I already have?

<<#3. Does your monitor have settings that you can adjust? >>

Under Control Panel's Adapter Properties window, the "Refresh rate" settings available are "Adapter default", "Optimal", "60 Hz", "72 Hz", "75 Hz" and "85 Hz". I know from my monitor's documetation that my max adapter resolution is 70 Hz, but as I mentioned previously, Windows does not allow me to select "70 Hz". I have tried variously setting the display to "Optimal", "Adapter default", and "60 Hz", but none of these settings seemed to resolve the monitor flicker issue in Dos.

<<#4. Lastly, you may want to tweak with the MODE.COM (or .EXE) command. Use START > FIND to locate in your WINDOWS folder.>>

Thanks for the Website reference. However, when the Web page does not seem to mention how to tweak display adapter settings in MODE -- onlysettings for BW/color and number of lines?

by jmstitt

If you do have a selection for 72Hz, I would try it. I have had many monitors that supposedly weren't rated at the higher frequency, but would not work properly when set to anything else. If the screen does not look right after the setting change,then just undo the adjustment. If that doesn't help, try attaching a different monitor that you know is good and has no problems. If you get the same results, try replacing the video card with a known good one. That should identify which piece ofhardware is causing your problem.

by galahad04

Thanks for the suggestion. I tried increasing the selection, and, although it did not entirely remove the flickering, it did make it signficantly less.

by mzy

One first thing, what is your resolution? This can cause some problems if it is more than 1024 X 768. Change it to smaller resolution to check. If this is not the problem, the monitor is most probably not compatible with DOS in Win ME. This happenedto me also when I upgraded my computer from Win 95 to Win 98.

Hope this works,
Maozy

This discussion is closed to new replies.