Discussion Locked

Reformatting of c: drive

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all, I'm looking to reformat my c: drive so I can re-install win-98 onto it from scratch. Currently, my c: drive has a mix of win-95/98 on it and is having problems (.dll & maybe registry issues) due to trying to go from win-95 to 98 and back to95 again. I thought the best thing to do would be to reformat and reinstall. Any pointers on how to begin my reformatting of c:
Is it as easy as typing in format once I'm booted off of the startup disk?
Thanks in advance,

11 replies

by thechas

Yup! it is just that easy.
If you want to wipe the disk more thouroughly, type format c: /u
You need the c: to specify the drive to format.
The /u switch means unconditional and erases the drive better than without the switch.
Some people would recommend using the /s switch also. This copies the system files onto the drive.
It is not necessary if you are going to install 98 right away anyhow.

Make sure that you back up any critical files, and the information for your ISP and e-mail accounts.

When you re-install 98, I recommend selecting custom and choosing the options that are installed.
Don't forget to have copies of all the drivers for your hardware on hand.
Install the MB/chipset drivers before installing drivers for thevideo and plug in cards.

by mphoffar

It's that easy. Just make sure you're CD-Rom Drivers are working with that bootdisk before formating. Nothing worse then formatting and finding out you don't have a mscdex on your bootdisk.

Mark

by picturethat

Couple of things, be sure to write down your video card type/drivers, modem type/driver, any other special devices and drivers you are using. Be sure you have these on cd or disk. Make a emergency boot disk and boot on it to make sure you CD works with this disk. Copy the format and fdisk to this disk if it isn't already there. Then boot on the emergency disk and fdisk the drive delete the partition, reboot, fdisk and create your partition. Now format /s once done copy your cab files to the HD and install from the HD, usually the cabs or in the win98 just copy it to the HD. This way it will never ask for the CD again. It is easy after you have been thru it a couple of times. Good Luck!

by fred king

I would backup the work on the c:\, create yourself a boot/Startup disk. Check you have all the drivers.
boot to the floppy, start with CDRom support
format c: /s /q
/s = copy system files
/q = quick format
after format
cd=e
e:
setup
and load windows 9x

Have fun
Fred Davies

This discussion is closed to new replies.