Discussion Locked

Rid Pack Bell of hiding Device Manager?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We were trying to install something with Direct X drivers. The program seems to play (can hear audio)but loses all video. I wanted to see what was going on with the video drivers and I CAN'T GET TO THE DEVICE MANAGER! The machine is a:

2000 MODEL PACKARD BELL W/ INTEL PENTIUM II PROCESSOR 400 MHz, 512 KB Lz CACHE, 64 MB SYNCDRAM, SiS 6326 vid card

Packard Bell has hidden the device manager thoroughly. I can't get it in Safe Mode, not in Settings, not through My Computer - Properties.I want to release that hidden tab (the General and Performance tabs are there). Can anyone tell me how to get Packard Bell to SHOW Device Manager? Any hints as to why the video is gone would be appreciated too. (The rest of Windows is fine, just no video in that program.)

Thanks in advance.

5 replies

by parbo

This setting controls whether the Device Manager, under Control Panel / System is visible.

Open your registry and find the key below.

Create a new DWORD value, or modify the existing value, called 'NoDevMgrPage' and edit the value according to the settings below.

Exit your registry, you may need to restart or log out of Windows for the change to take effect.

Settings
Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersionPolicies\System]
Value Name: NoDevMgrPage
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)

this is what it will look like
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\...
(Default) REG_SZ (value not set)
NoDevMgrPage REG_DWORD 0x00000001 (1)

Hope this helps

by dcosgrove

It sounds like you may be running in one of the protected modes. Pack Bell had software which would lock "children" out of functions which could permanently alter the O/S. The good news is, if I'm not mistaken, you can go into cybertrio or something similar and switch modes to advanced mode or unprotected mode, I forget the exact terms. The bad news is, if you had a password and lost it, I have found no way other than reformatting and restoring to remove old passwords. Good luck, if you need more info, let me know and i'll find an old P/B and find out more.

This discussion is closed to new replies.