Software

Ask something
Question Locked

Router IP Address

0 helpful
15 replies

by tech_soul7

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I reset my router to the factory settings, now dhcp is off I can't access my router's configuration page again. How can I know which Ip address my router is using now? Is there any at all, becouse when I plug my cable I get ip address from apipa, not routers dhcp. When I try to set it manual than I can ping my computer but not router.
Any idea?
Thanks

15 replies

by tech_soul7

Well the router is "airgate"???? (that's router from one company that was in voip buisness) The problem is that you've got manual for software that was deliverd by the firm to the end user (prefigured settings). But now when I reseted it to the factory settings manual isn't of any help any more. So how can I get ip address of that router again so I can access them a configure it again,becouse dhcp is now off and I don't know which address is now my default gateway address...
Thanks for any help!

by cg it

or even checks the mfg web site?

Why would someone from Crotia, thin... "humm, can't get an address from my consumer level router, [bing] Hey! lets ask on TechRepublic"

by tech_soul7

sorry but i asked for help,iff you dont want to help please dont post. Thanks

by tech_soul7

I already have that,but unfortunatelly it's useless. I need to discover what ip address my router is using now. How, I don't know,so I'm asking you. Maybe to ping range of ip addresses and wait for response,or something like that, but where to begin....???

by netman1958

but according to this manual:
http://www1.telme.sg/download/%5BTELME%5DAirGate_UserGuide_ENG.pdf
See section 2.3-Quick Start

How to set your network environment?
ATA default network environment:
For Wan(no need in Client mode)
IP: 192.168.1.1
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.254

For Lan:
IP: 222.222.222.1
Subnet mask: 255.255.255.0
Default Gateway: 222.222.222.254

How to connect your pc to the WATA?
1. Con#gure your LAN port to get an IP address via DHCP.
2. Use RJ-45 cable to connect to the LAN Port of the WIFI ATA.
3. Use web browser (IE/Firefox) link to url: Connect to LAN port (default), link to url: http://222.222.222.1
4. Login user name: telme
5. Login password: telmenet
6. Use this web con#guration interface to con#gure all system functionality; #rstly you should change
the WAN network environment to yours.

by older mycroft

... is that you have to navigate BEYOND THE COVER!

It's a bastard I know, but that's how books work. You have to open them and try the ancient art of reading. :^0

by dedlbug

I have never heard of LMGTFY. love it. =]

by cg it

:)

oh wait, isn't that how Geek Squad was founded?

by netman1958

But in our case we will try not to look the part! Every time I go into one of the local BestBuy's I see a few of the "Geek Squad" and wonder if they have to look the part to get hired.

by cg it

They wouldn't hire me when I applied.....and I said I would work really cheap. maybe that was the problem.

by dedlbug

I intervied for Geek Squad several years ago for a part time holiday gig...trying to make a few extra bucks. Turns out I was WAY over qualified. I just wanted to work behind the bench or even sell on the floor. They asked me questions like "What is the Internet?" or "What is Windows XP? or "Do you know what a hard drive does?"

Turns out I didn't want to work there anyway after the interview. (I'd rather be poor.) But they were really concerned with "are you interested in computers and read up on current events in the industry?" They were not impressed with my technical background, but would have hired me if my glasses were taped up.

This discussion is closed to new replies.