Question

Locked

router works but can't acces router

By ronaldsax1 ·
I have a wrt54g, ip 192.168.1.91 at least that's what I got when I did a tracert , I can ping it , but I can't access it from the browser , i get a time out connection, any ideas?

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Linksys right?

by CG IT In reply to router works but can't ac ...

if you've never changed any settings...

address is 192.168.1.1 just type in the user name and password give to you in the quick start guide

Collapse -

solution

by warlock605 In reply to router works but can't ac ...

give the complete picture and configuration of the network,because it may be that it don't have any route to the required destination in the routing table..........

Collapse -

There should be a reset hole, so that you can reset the router.

Have a look at your router, there should be a small hole of where you insert a pin to do a reset. Push a pin in the hole and keep it there for 15 seconds and then release, this should now reset your router to the default settings so that you can then access the router browser and then the router settings.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

Back to Software Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums