Software

Ask something
Discussion Locked

Roxio Easy CD Creator 5 & Windows 95

0 helpful
5 replies

by deeda 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to burn some data CDs using Easy CD Creator 5 Platinum. My machine is a Windows 95 Machine with an external HP CD-Writer Plus and I have put the latest updates on it and when I go and try to burn it gets almost done (97%) and then I getthe following errors--

E80041899 - Write Errors buffer underrun occured [06/C5/00]
For help option for this one I didnt get anything, it just told me what the dialog box did?

E80041934 - Track Writer Error - Flush Failed [T7127]
This told me to ? Try another blank CD, Try another brand of media, Retry, Reinstall Easy CD Creator.
I have tried all of these plus also installed the updates on the website?

E80041925 - Track Writer Error Command retry failed [T7118]And this one told me Try another blank CD, Try another brand of media, Review the error message(s) that
accompany this one, Check for faulty or disconnected cables between your computer and your CD-
Recorder, Check for improper termination of the bus (SCSI only), Restart your computer.
I have did these also. I have checked to make sure it was properly installed & I have also tried it on another
Windows 95 computer.

Please if you can help me in any way orif you have any suggestions please email me at dmartin@lssdata.com

Thank you in advance

Deidre

5 replies

by joncanfxit

It appears that You have installed the latest update, try checking article below, there are pertinet causes mentioned, hope this helps.

Roxio Knowledge Base Article - EEZ000018

John

by deeda

I looked at this article but it didnt help I still get the errors. Thanks for the input though!

by thechas

1. How much RAM do you have?
128MB would be the minimum that I would install to attempt to burn CDs.

2. How fast is your CPU?
I believe that you need at least 350MHz for Easy CD version 5

We finally gave up on Easy CD 5 on a Gateway with Windows 95. There were just too many issues and conflicts with the Gateway hardware and W95.

Chas

by deeda

My RAM is 128 and my CPU is 350 MHz. I think I might try to install everything in a 98 machine and see if i can eliminate it being the hardware.
Thanks for the input

This discussion is closed to new replies.