Discussion Locked

Server Question: To Dell or not to Dell?

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What has been your experience with Dell as a server? I am familiar with Dell PCs, not servers. Dell uses OEM's for the PCs. Who makes the Dell servers? How do Dell servers rate in comparison to other server brands such as HP (Compaq, now HP), and IBM? Could you recommend any websites for further research?

Thanks,

Minina

13 replies

by j.a.lawrence

We've always used Dell here, & they seem to do the job. We tried a few Compaqs at our Eng. Dept, & just couldn't get the hang of them...

Or biggest beef with other systems has been the 'custom' OEM stuff that you run into. "Here's your OS, don't Service Pack it...", that kind of stuff. It seems to eat all the usual cards you throw at it with no problems.

I've had a few problems with DAT drives (haven't we all?) on a couple of my systems, but all in all, I wouldn't use anything else. we've got a small company, & the server I yanked out was a system that ran for 9 years. I rebuilt it once as a panic gesture to Y2K, & threw in a new SCSI drive, taking advantage of the 'opportunity'...

We also had an anomaly with with a dual monitor card which seemed to be related to a voltage drop on the pci bus, but it was solved by moving it closer to the power source (TS from the card mfg.). Hmmm...

by r. a. caluste

We are using Dell Poweredge and everything is fine. Support is ok. In the Philippines, Dell leads in the server market.

by bohicam1

I too have placed only dell servers in my clients' workplaces. They are an excellent machine to work on, upgrade..etc...and I do believe they are the most inexpensive on the market too.
Good luck!

Mike

by ann777

I've used Dell, Compaq, HP and IBM. All of the IBM's have been UNIX-based. Two of the HP servers have been UNIX-based, three WinNT-based. And Dell and Compaq with WinNT. I've also used no-name clones as servers.

My home Server is a Dell PowerEdge 1300 (an older model PII 400MHz-- but the only thing I've ever had to replace was the CMOS battery)... it still operates with WinNT. The choice of this as a server is not regretted.

My list of preference, based on experience, is:
Dell, IBM (hardware is solid), HP, Compaq, no-name (if the customer wants to save $'s). But for a server, I'll always recommend SCSI drives.

by olisao55

Dell is the best handsdown. As far as service, they go the extra mile. I have 7 dell power edge servers. From dual 1400 mhz w/3 gigs ram to pII 450 w/256 meg ram. All are flawless. When we looked at all of our options in buying new servers this pastfall, we looked at several companies. For the money, poweredge 2500 was the best option. The thing weighs 93 lbs! It is a monster,(4 systems) but there has never even been a hiccup. Since November they have never been rebooted.

by jordana

Dell. Been using Dell Servers for about 5 years now, and wouldn't recommend anything else. Great support, but we don't need it too often.

Jordan

This discussion is closed to new replies.