Discussion Locked

Standard TCP/IP Port in Windows 98

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to connect users with Win98 workstations to a printer with its own LAN adapter and TCP/IP settings. With Win2K clients, you could configure the workstation using the Standard TCP/IP port; however, you don't have that option with Win98 clients. So, does anybody know how to create a new TCP/IP port in Windows 98? Please let me know. Thanks.

7 replies

by reference

If it has a built-in Network Card, then it must have some way of configuring that card. this config should also allow you to specify IP address, protocol, etc...
Once configured, you should be able to browse to the printer, and set up as a network printer...meaning, add printer, network printer, browse for it, than the new port will be created.
the other approach, I guess, is to go to an existing printer, click details tab, click add new port, then browse to your printer.
any help?
Good Luck!

by techiehelp

The problem was finally resolved by Xerox. They had the port monitor (TCP/IP port creator) on their website. Thanks for your prompt response.

by mphoffar

With any 9x client, the only way I've ever been able to do that is to use HP jetdirect to create the port.

You can also share the printer out of another workstation and then let the 9x machines hit that station via the netbios name.

It's also worth mentioning that some HPs have a small server built into them so you might be able to configure a machine name there and let people hit the netbios name that way.

Good luck to you

Mark

by techiehelp

The problem was finally resolved by Xerox. They had the port monitor (TCP/IP port creator) on their website. Thanks anyway for your suggestions.

by fierygod

This ability is not built into Win9x. The reason? Microsoft expects that network printers exist in corporate environments, and they want you to use NT or Win2k at the office, so they do not build this into Win9x. That way you have to use a server for printing, and they can sell NT Server.

There are several utilities available to allow you to create a tcp/ip printer port on windows9x. The two that come to mind are
1. ACITS: http://www.utexas.edu/academic/otl/software/lpr/)
2. Windows LPR:http://ich210.ich.kfa-juelich.de/wlprspl/index.htm

Of the two, ACITS is much preferred in my experience, as it is easy to use, stable, and requires nothing to run in the background. I have not used the latest version of LPR spooler, but the 4.x versions were much more trouble than the ACITS.

The problem... both are licensed per seat.

There may be another option, depending on what type of printer you have. Drop me an e-mail with the printer type and I'll tell you if I know anything about that type of printer.

by techiehelp

Although I did not use either one of the suggested apps., I do have the links for future reference. The problem was finally resolved by Xerox. They had the port monitor (TCP/IP port creator) on their website. Thanks for your help.

This discussion is closed to new replies.