System is not starting and mother board is not detecting ?

By tlight_bsp ·
channges i have made before the problem occurs:
> installed VISTA INSPIRAT2
> system worked for 1 day
> system stopping at the startup process "windows is starting"
> mother board is not deetecting
> but motherboard is working with another PC.
> i cant able to press F2 or F8 bcz M.B is not detecting
> so,i have used PS/2 to USB converter and connected M.B to USB port , M.B detected but not working with my computer,but working with any other computer.

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

How come your motherboard is working with another computer..

When you say it is not working or detecting?
What is it not detecting?
What operating system are you running?
How much memory do you have?
Do you have SATA drives or IDE?

Please post back if you have any more problems or questions.

Collapse -

I think this person means Keyboard not M'Board <NT>

by OH Smeg Moderator In reply to How come your motherboard ...
Collapse -

See if this helps

by Jacky Howe In reply to System is not starting an ...

Start the PC and repeatedly press F8 to boot into Safe Mode. Then navigate to Add Remove Programs then uninstall 'Vista Inspirat 2'. If you can't uninstall it using Add Remove Programs use Msconfig to prevent 'Vista Inspirat 2' from running at Startup. Look on the Startup tab to find the program. Then start the PC normally and uninstall the program.

If that doesn't work and you can get into Safe Mode, you can try a System Restore to a date before you installed the Software. To run System Restore from the command prompt navigate to c:\Windows\System32\restore and then type in rstrui.exe and press Enter.

Post back and let us know how you get on.

Collapse -

Craft disease :)

by Jacky Howe In reply to See if this helps

follow OH Smeg's advice and when you can access the PC follow the above steps.

Collapse -

If I am interpreting you correctly

by OH Smeg Moderator In reply to System is not starting an ...

And the Keyboard is not working here try clearing the BIOS by removing the Battery or resetting the BIOS Jumper to Clear. Then return the system to the way that it was and try booting again.


Related Discussions

Related Forums