Discussion Locked

TCP/IP port for terminal services

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do you use terminal services remote administration over the internet to connect to more than one server on the same subnet? I have two Win2K servers in the same location that I want to connect to over the internet(Dial-up is way too slow.) I use non-routable IP numbers on the network and my only internet connection is a Linksys DSL router. I configured the router to forward port 3389 to the first server. Now how do I connect to the second server? Can I configure a different port number on the terminal services on my second server and somehow have the terminal services client specify that port?

5 replies

by timwalsh

Can't find anyway from within either TS Configuration tool or TS Manager to change the port number used.
However, you might try a work-around. Set TS client on the server you can reach. Create a connection to your other server. Connect to the second server through the first server. Don't see any reason why this shouldn't work, although you may pay a minor performance penalty.

by curlergirl

I also don't know of any way to change the port setting for remote admin using terminal services. You could, however, use an alternate remote administration tool like pcAnywhere (costs about $150 per license, I think) or VNC (public domain softwarefrom ATT Labs). Both of these tools allow you to specify the ports used. I'm not sure how flexible VNC is on this in terms of how you set your remote client to connect to the host. I know the newer versions of pcAnywhere allow you to specify the ports on both ends easily within the software itself so that you don't have to do registry entries or .ini file changes in order to connect to two different hosts from the same remote client. Hope this helps!

by typamfiloff

Have you tried a VPN solution?? It worked for me. I'm able to connect terminal services to multiple servers and workstations(XP with remotedesktop enabled) behind my vpn router which is behind my dsl router. Once the vpn is up you just specify whichIP you want to connect to when configuring terminal services. If your curious I'll tell you how I did it.

by spsellars

Note: There shouldn't be a space in that URL, remove the space, or just look up article Q187623 on Microsoft's site.

This discussion is closed to new replies.