Discussion Locked

Terinal Services & Printing

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is it possible for a client that is connecting from home to a terminal server to be able to print at home? IF so can I have a quick rundown of what would be necessary to accomplish this, Thanks.

7 replies

by dc1

I belieev the default for the users profile is to use there local LPT printer. Look in user Manager for the users profile and there should be a check in the terminal service's tab that show where this is allowed.

by rabbit_runner

Yes is it possible. But there are some very particular steps that need to be done. Let me try to spell it out. First, do you 'dial-up' to the server? If you do, you MUST set your dial-up to assign you a STATIC IP address. This is done through the RAS setup on the terminal server. in any case, you MUST have a constant IP address for your computer. (it can be on the PPP adapter of your PC. You do not need a NIC). Next, your printer must be shared on your computer. Even if you only have 1 computer at home, it must be shared on that computer. 3rd, once you dial in to the terminal server, make certain you can PING the ip address that is assigned to your computer. 4th, create an 'lmhosts' file (file name = lmhosts) Notice that there is NOfile extension to this name. It is a text file and use note pad to creat it. The IP address must be the one assigned to your dial-up connection. You will need to add a line like this...
10.0.39.100 #PRE
Place this file in the following directory of your Terminal Server..
%systemroot%\system32\drivers\etc
Reboot your terminal server.
NOTE: the can be anything and does not need to match anything else.

I am going to create another note with the additional steps to follow.

by rabbit_runner

In that line of the LMHOSTS file, do not use the <> symbols. I added them to show the name is one that you can assign. The LMHOSTS file will then match the IP address to a computer name.

5th, install the printer driver on your terminal server. The port will be a 'local port' and will look something like the following...
\\\

6th, and this is VERY important.Create a user on the terminal server with a password. Give it dial-in permissions. ALSO when you dial-in, use the same user name and password for your dial-up connection. Lastly, when you log into your terminal server session, you must use the same user name and password. All usernames and passwords MUST match for each connection you make to the server. If they do not match, you will not be able to print.

At this point, you should be able to print from your terminal server session.

Best of Luck

This discussion is closed to new replies.