Question Locked

The famous VISTA vs. XP connection problem.....with a little twist.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

So.....

I had an XP, well two actually, and I got a Vista. They had problems connection, but i got them to work quite well actually. Now, a second Vista comes home and what do ya know?.... it doesn't connect! Wow, what a surprise! Well... the way I solved the problem last time with the first Vista, I bough a new router since my old one stopped working and i used the CD to configure the Vista with all the stuff it needed and it worked!

PROBLEM: after using the same CD on the second Vista, it doesn't connect properly, let me ferther explain:

My problem computer (i will call it V2 (Vista 2)) can see my first Vista computer (V1) and can access files on it, but the opposite doesn't work. V1 can see V2 but cannot access files with that stupid message "...is not accessable.....you might not have permission..."

If that isn't enough. my XP computer (XP) cannot access V2 but is fully connected to V1.

Simply put in an equation:
V1 --> V2 NO
V1 --> XP Yes
V2 --> V1 Yes
V2 --> XP NO
XP --> V1 Yes
XP --> V2 NO

Also...(yeah, I know, too many porblems)
With this CD from Linksys, I now can no longer see my Gateway, Subnet Mask, or IP Adress with Command Prompt: "ipconfig/ all"
But I can still "ping" computers. From V2, i can ping V1, from V1 I can ping XP, and from XP I can ping V1, all with 0% Loss.

Any suggestions?
- Thanks

P.S. - My second XP computer is not mentioned because it is currently not connectable, due to the ethernet connection in the room that we put it in is not working. Better to deal with 3 rather than 4 computers, I think!

6 replies

by animal76772m

I had a similar problem. I switched the boot log on to windows log on and problem solved. Make sure that all pc's are using the same boot log on.

by bincarnato

Throw the CD away that came with the router. Perform a hard reset on the router. Unistall anything that the CD installed on any of your PCs. Open the web-based router config by opening internet explorer and put 192.168.1.1 in the address bar. Username field is blank and password is "admin". Setup your internet connection if you have PPoE or a static IP address. Now reboot all PCs. On the Vista machines, go into the network and sharing in control panel. Under sharing and discovery, enable what items you would like to share. Make certain that the user account you are trying to connect to resources on the other PC is also on that PC.

Here is a link that has more detail of what I am saying:
http://windowshelp.microsoft.com/Windows/en-US/Help/6ed24a90-6b57-4f0f-a3b3-e521ae945f331033.mspx

Bottom line, the stuff that the Linksys CD installed was counter productive and I avoid using it all costs.

by flashrob

after spending many hours on this...

Vista's Network Discovery Feature is undependable...

Some of the time it works and SHOWS ALL MY NETWORK LOCATIONS ...BUT OFTEN IT ONLY SHOWS THE NETWORK LOCATION ON THE VISTA LAPTOP ITSELF.

in any event... after fiddling with "router settings, network card disabling/re-enabling, registry modifications to the Vista Network Discovery Program, frequently having to reset Network Status to "private" because the search program keeps remaking it "public"...AND BY DEFAULT IT CAN ONLY FIND "PRIVATE NETWORKS" (that's one thing you have to keep and eye on, or you'll have a problem right there in discovering your network locations...)...anyway,

here's what I'm trying now...

I'm assuming that the "Vista Network Discovery Program" is "buggy!"

Therefore, when it DID PULL UP ALL MY NETWORK LOCATIONS...I CREATED "SHORTCUTS" TO ALL OF THEM AND "PUT THEM ON MY VISTA LAPTOP'S DESKTOP...

now, if you don't keep the "Network (discovery folder)" open by "reducing to your taskbar" ...thereby keeping it alive and current...it will once again "do a network location search"...

I've tried this several times, and it doesn't always find the networks again...BUT THE SHORTCUTS GO RIGHT TO THEM IMMEDIATELY...

leading me to believe that you can access the network locations if you "know the correct address" which you can easily get by making "shortcuts on your desktop" to... when the search feature does turn them up...

I'll be trying this in the next few days to see if this resolves the problem...after-all I don't care so much if the "Vista Network Search is buggy" as long as I can get the Network Locations in a Folder and access them anytime, regardless of whether the search program can find them...

course if "clicking on them" fails...then it's not likely that it's a problem in the search program, but some other networking problem, and I'll take it from there...

...will update if I figure all this out... but for now, it's looking good with the "desktop shortcuts" I created to all my network locations...

regards,

flashrob

This discussion is closed to new replies.