Discussion Locked

The Right Way to Crimp CAT 5 UTP Cable

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I were to connect 2 pc's without a hub and only using 1 CAT 5 UTP cable, how would I crimp its ends?

4 replies

by tomsal

What you are looking to do requires a crossover cable. Now me personally, I'd just buy a crossover cable. I used to make my own cables constantly years ago when we had a whopping 10-15 employees working here. These Days my time is way more valuable since we have grown about 10 x's in size (and I'm still by myself as the lone network guy) so I buy my cable at length pre-made and pre-certified.

Anyways to do this yourself you'll need to track down the spec of cable - I don't mean the category of the cable, I mean what TIA spec it conforms too. I know it makes a difference when you are making a "normal" node-hub patch, it may make a difference when creating a crossover as well.

Best thing there is to go to the cable website of that particular brand of cable you are using. Any decent cable vendor posts the wiring specs online.

by ghstinshll

in short, wire one end in a pattrern you can remember... on the other end, cross pin 1 with pin 3, and pin 2 with pin 6 and put the end on.

This discussion is closed to new replies.