3 replies
by hamzaet2003 Accepted solution
by rob miners Accepted solution
Try the Windows Vista Upgrade Advisor before you purchase your copy of Vista. It will also determine the Drivers that will be required.
The Windows Vista Upgrade Advisor will help you determine whether your Windows XP-based computer can run Windows Vista. You can also use the Upgrade Advisor to determine whether your Windows Vista-based computer is ready for an upgrade to a more powerful edition of Windows Vista.
For more information about how to download and to install the Windows Vista Upgrade Advisor, visit the following
Microsoft Web site:
http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/upgradeadvisor.mspx
Make sure that you have a Backup or a Recovery CD/DVD of your Hard Drive before attempting the Vista install as you may inadvertantly overwrite a Recovery Partition on the Hard Drive and destroy any chance of the XP Recovery.
How to perform a clean installation of Windows Vista by running Setup from the current version of Windows. This is probably the easiest way to install Vista. Or you can use the Custom features to delete the Primary Partition and recreate it. It should be C: and equal that size if you take note before you start. Have your Drivers handy as well.
http://support.microsoft.com/kb/918884
Keep us informed as to your progress if you require further assistance.
If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D
by oh smeg Accepted solution
Hardware will not be sufficient for Vista.
Vista is a much bigger OS than XP is and consumes a lot more processing Power and RAM than XP ever did so you need a lot more hardware to get a similar result with Vista that you did with XP. Also Toshiba doesn't list any Vista Drivers for this model system as shown here
http://askiris.toshiba.com/ToshibaSupportSite/searchEntry.do
As Jacky suggested run the Vista Upgrade Adviser and if your system is compatible you can proceed one of several ways. With a M$ Branded Install DVD you can upgrade your Existing version of Windows but this is likely to introduce problems.
It would be better to Wipe the HDD and load Vista as a Clean New Install to a Blank Unformatted HDD but Vista comes on a DVD not a CD so at the very least you'll need a DVD Player to load Vista. Not many 2005 Systems had this so if you do not have a DVD Player straight away your System is Incompatible with Vista.
But if you wish to persist you need a Wiping Utility like Boot & Nuke available here
Then you'll need a Vista Install DVD originating from M$ and not a System Makers Recovery Disc as this is not a full version of Vista. It is only the base Install with the Drivers for the hardware it is made for so you'll need a M$ Is tall Disc that comes with all of the Default Windows Drivers which at the very least will load the Minimum Required Drivers to allow you to install any necessary Drivers after you have installed Vista.
Then you'll need to have already found and downloaded Vista Drivers for your Hardware and pay particular Attention to the Sound Drivers here as you need one that works with Vista and your Hardware. SonndMax isn't one of the bigger Sound Device Suppliers and they very well may not have rewritten the driver for your Hardware for Vista. You'll also need to install the Sound Driver and Associated Software before logging onto the Windows Update Web Site as these Drivers are not Digitally Signed with M$ so once you have WGA installed you will be unable to install the Sound Driver.
The other thing you'll need to watch out for is M'Board Chip Set Drivers and Video Drivers here as well the M'Board Chip Set Drivers may be available from Intel but the Video Card Drivers may be a different Kettle of Fish and you may be stuck with the Windows Default Driver which has limited functionality.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending