Discussion Locked

Trouble to connect a DV Camera to USB

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a JVC DV Camera ( DVP3 ) and a PC running Windows 98 SE...

I have also a 1394 IEEE card in my compter and I use it to connect my camera to the firewire port and get the video to the computer. ( that work fine )

BUT with this camera I can also take some picture stored on a small card ) and transfer to the PC trough the USB port ...And I have some problem to do it fine ...

After some troubles due to some missing drivers ( USBNTMAP.SYS and USBRESTOR.SYS ) not found on my Windows 98SE CD ( I finally found them on the web ) I can connect successfully the camera to the USB port and the "unplug and eject Hardware" windows shows it successfully as "Disk on JVC DV Camera" but in "My Computer" I do not have the REMOVABLE DISK icon has describe in the JVC tech doc ...

Any ideas of what is missing on my PC ?
( Note : I have a drive C and D and my CD is on drive E )

3 replies

by thechas

Those 2 files don't appear to be part of the "standard" W98 USB drivers.

Anyway, I would start by updating your motherboard / chipset drivers.

Then, look in device manager, select view devices by connection, and look for the camera to be attached to the USB ports.

It is possible that there is a conflict between the firewire driver and the USB port driver.

If the problem persists, remove the firewire card from device manager, shutdown, and move the card to a different slot.

Chas

by christophe.labbe

Finally it works !!!

I had to ajust the setting in device manager because the drivers used was not the one installed by the CD from JVC ... ???!!

Thank you anyway TheChas for your response ...

Cheers
Christophe

This discussion is closed to new replies.