Windows Forum

Ask something
Discussion Locked

Trouble with linksys EFSP42 Print Server

0 helpful
1 reply

by dot_boy1999

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After the driver installation I can't get the print server to respond. Explanation; A dialog box appears that finds the IP address then, when I click OK it states that the print server fail to respond. If i go through the Bi-Admin utility I can findthe IP address and print a test page from there but not through any other source.
Am I missing something?

1 reply

by montesa247

Is this a new installation or just update of driver? I'm not familiar with this print server, but first thing that comes to mind is see if you can ping it. If not, verify that you are on the same subnet. Sometimes the utilities don't care about things like that.

This discussion is closed to new replies.