Question Locked

Trying to fix BIOS, soso fustrating

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have abit I-45CV motherboard. Have recently put windows 7 on. Can't get back into the BIOS. Problem with BIOS? Try updating BIOS by flashing it using a CD, works fine untill I get an error message "No AWDFLASH.EXE or havn't extracted .EXE file to .BIN file". I don't understand, i'v done everything right, i think? Please help?

8 replies

by Former member

Clarifications

by older mycroft

The procedure for flashing the BIOS is as follows:

[b]The case of AWARD BIOS

Example: In Windows, BIOS file of AB9: "AB914.ZIP"

4.a) Please double click AB914.ZIP file.
4.b) The self-extract file extract the .BIN file only..
4.c) The self-extract file extract 5 files which including AB9_14.txt, AB9_14.BIN, awdflash.exe, abitfae.bat and runme.bat.

The case of AMI BIOS

4.a) The self-extract file extract the AB9_14.BIN file only.
4.b) The self-extract file extract 5 files which including awdflash.exe, abitfae.bat, runme.bat and awdflash.exe.

The case of EFI BIOS

4.a) The self-extract file extract the .BIN file only.
4.b) The self-extract file extract 5 files which including awdflash.exe, abitfae.bat, runme.bat and awdflash.exe. [/b]

http://www.abit.com.tw/page/en/download/guide.php

Have you carried out these steps to the letter?

edited for link.

by thumbsup2

probably creates a bootable CD, or floppy, which would contain the BIN file.

by oh smeg

You are trying to flash the BIOS with the M'Board CD. The Award Flash Utility is a DOS Utility and needs to be used in conjunction with a BIN file the Award Flash is the Utility that allows you to Flash the BIOS but it doesn't have the Data File to write to the CMOS Integrated Circuit.

But no matter what the only reason why you should be unable to enter the BIOS is because you are using a USB Keyboard which doesn't have power till after the Unit has Posted. Here you need to use a PS2 Keyboard if only temporally to reset the BIOS to what is required then you can Save the Changes when you exit and go back to using your USB Keyboard again.

I'm sure that the others here have provided a Link to A=Bit's Web Site for the required File to Flash the BIOS but if your only problem is that you are unable to Open the BIOS with a USB Keyboard Flashing it to the latest Version available isn't going to solve that problem as there is no software fix for the Hardware Design.

Col

by Former member

I don't have a USB keyboard.

by oh smeg

Clear the BIOS by changing the Jumper on the BIOS Clear Header Strip from 1 2 to 2 3 and leave it there for the recommended time in the M'Board manual before reseting it to the 1 2 position. To locate this Header Strip you'll need the M'Board Manual anyway.

If that doesn't work the only option left is either the M'Board or the Keyboard has died and gone to [b]Silicon Heaven[/b] I would suggest trying a Known Good Keyboard before buying a new M'Board though.

Col

This discussion is closed to new replies.