7 replies
by rickydoo
What kind of connection is she using? Is she behind a firewall? I'm running 5.5, and it has a passive FTP setting for firewalls and DSL. I think this is another way of saying FTP over HTTP.
You might want to look into permissions on the firewall, too if there is one.
by lordinfidel
FTP is one of the hardest protocols to allow thru a firewall that does not do connection tracking.
FTP uses 2 different ports to connect with 21 (Command)and 20(Data).
Normal ftp goes like this:
1. Client connects to server port 21, requests a session, tells the server what port # to connect to.
2. Server syn-acks to original request.
3. Server *initiates* a connection from it's tcp 20 to the port specified by the client.
I starred initiaite because it is important. Most firewalls do not allow start of session packets (syn only) thru the firewall to unpriv ports (<1023)
PASV (passive) mode is supposed to correct this.
1. Client opens up command channel (21) to server, requests passive mode
2. Server allocates a portin the unpriv range on itself, returns that port #to client.
3. Client then initiates another connection from a port in it's unpriv range to the unpriv port allocated on the server by the server.
The firewall rule should then be for passive mode ftp.
Outgoing
lan wan syn established
<1023 21 yes yes
<1023 <1023 yes yes
Incoming
wan lan syn established
21 <1023 no yes
<1023 <1023 no yes
Hope this helps explain it.
There is no such thing though as FTP over HTTP. There is however a http download that "looks" like ftp. But it is just using port 80 to transfer data. Which is why you get the box asking, open from current location option.
by lordinfidel
the local firewall is not set up correctly to allow passive ftp. (or ftp for that matter)
Most web browsers will attempt to use passive ftp for ftp connections.
But in the browser settings (tools/internet options/advanced) you can specify to use passive FTP always.
by jkaras
by mrafrohead
Personally I haven't had any problems with 6.0...
This is what I would do to test it out. This will definately let you know if you're having some kind of "firewall" problem.
http://www.viaarena.com/?PageID=2
This should be the drivers pagefor Via Arena. The first section will be for the Via Hyperion drivers set. There is an available HTTP and FTP download. I would try to download the file from both types. Http will run on port 80 and ftp should run on 21. That will let you know if you're dealing with a fuxored machine or if you're dealing with more of a firewall type issue.
Please try it and let us know what happens so we can go from there.
Mrafrohead
This discussion is closed to new replies.
Trending Community archive posts
Sort by Trending