8 replies
by jcfinnicum
by timwalsh
You may not need the password.
Is there any data that must be saved? If not, you don't really need the password to do what you want to do.
If the drive is formatted NTFS, you will have to wipe the drive anyway because Win9x only supports FAT and FAT32.
Use a Win98 bootdisk, run FDISK and remove the non-DOS partition (which is how the NTFS partition will be recognized). Create a primary partition and format it (either FAT or FAT32 - your choice). Reinstall Win98.
If the disk is formatted FAT32, you don't need to go the FDISK route. Merely boot using a Win98 boot disk, move anything you want to save, delete the WINNT directory (or reformat the drive), and reinstall Win98.
There is no need to log-on to NT 5.0 (Win 2000?) to uninstall it unless your drive IS formatted NTFS and you need to recover data before reformatting/repartitioning.
Hope this helps.
by jcfinnicum
by dklippert
Make a DOS boot floppy
Add FDISK.EXE to disk
Boot with the floopy
Run FDISK /MBR (undocumented command)
This will recreate the Master Boot Record
by jcfinnicum
by joseph moore
Are you saying you need to wipe the entire drive of the NT install and put a clean copy of 98 on the drive? Easy. Put the Win98 cd in the cd-rom drive and power up. The 98 cd is bootable.
It will format and clean the drive, thereby removing NT in the process.
by jcfinnicum
by jcfinnicum
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending