Question Locked

USB not working after resetting bios on toshiba a135-

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
hello, I recently had the problem with the password prompt created by windows. I had a toshiba tech reset the bios and thought all was well. didn't realize until a couple weeks later that there is now a problem with the usb's. any device I plug in is showing as not recognized. I'm sure it has something to do with resetting bios. any suggestions before I return it?

2 replies

by Former member

Go into the "bios" and look for the section that has "usb" and see if it is "enabled", or just click on "load defaults". If that does not work, go int the "bios" and the "usb" section and "enable" "legacy usb" and then restart your system. If possible look for a update of your "bios" for your system, this will fix your problem, but you will need to make sure that you have backed up everything first.

Please post back if you have anymore problems or questions.

This discussion is closed to new replies.