Windows Forum

Ask something
Question Locked

USB Problem

0 helpful
4 replies

by akida

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When I connect a usb 2.0 device to my system the system recognizes there is something connected but will not assign a letter to device or install it, this is when the bios is set to enable usb 2.0. When I dissable the usb 2.0 and put it back to 1.1 the system recognizes the device and assigns letter and installs device. The usb card and all devices are both 2.0.. Please help totaly confused on what else to do.

4 replies

by oh smeg

The trouble is that while Windows supports USB2 it doesn't necessarily have all the available USB 2 Drivers included by default. When this happens you need to install the M'Boards USB2 Driver to allow the system to work correctly. You'll find this driver on the M'Board CD that came with the unit.

Col

by cholan41

This is the MB USB DRIVER problem ,u install the spefic driver from Cd / down load from the manufature web site and u correctly mention MB no,version for wht O/S

This discussion is closed to new replies.