General discussion

Locked

Virtual Private Network (VPN)

By r.favorite ·
I have a small Win2000 LAN. The PDC is a Win2000 Server using Active Directory.

I have a cable modem connected to a stand-alone Win2000 server. I share the modem connection with the LAN using WinProxy. I also use Zone Alarm on this server.

I have successfully set up RRAS on the stand alone server and connected from my laptop using VPN; however, I would prefer to connect directly to the PDC (through the stand-alone server and WinProxy) using RRAS and VPN.

I can trace this attempted VPN connection through Zone Alarm and WinProxy (I created a connection using port 1723 pointing to the PDC) but I get the message "there is no answer".

It seems the answer must lie in how I set up RRAS on the PDC.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Virtual Private Network (VPN)

by OriDjinn In reply to Virtual Private Network ( ...

It sounds to me like you need to set up IP routing on the Windows 2000 stand-alone server to point routing protocols to the Global Catalog (PDC). Email me if this doesn't help.

tkw@harlanbakeries.com

Collapse -

Virtual Private Network (VPN)

by r.favorite In reply to Virtual Private Network ( ...

Poster rated this answer

Collapse -

Virtual Private Network (VPN)

by r.favorite In reply to Virtual Private Network ( ...

This question was closed by the author

Back to Windows Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums