Discussion Locked

VPN-RAS server unable to log on

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

Problem: router and remote access server won't allow vpn connections,I think.

Specs: 2 Windows 2000 servers, both running service pack 3. Using active directory default security policy.

Internet: 2 cable modem connections 1 is usinga linksys router this is the gateway for all users. I have followed the linksys knowledge base article on connecting to a vpn server behind a router by adding port assignments.
2nd modem is directly connected to server 2 on a second network card static IP address from ISP.

Background: On server 1 the dual network card configuration worked fine for about 1 month then it stopped no reason. Then several months later it worked again. Then it stopped. I gave up on this and now I need to get it to work again, so I built from scratch another computer as server 2, same arrangement, network card 1 is connected to lan, and the second one is connected to static ip assigned cable modem.

Attemps:I have followed all the help files, books, and websites to set up the ras server. That part works fine and is easy. Once I use the wizard, I remove the router feature, add the dhcp server information to the set up, and try to connect via both xp-pro and win2k clients and all I get is error 800 unable to connect to vpn server my be down or security is preventing you from connecting, I have set the users to have dial-in privledges. I have even set up a new group and put the users into it, then made a new group policy in IAS set to allow connections if in this group.

I have used network monitor and I can see the client trying to connect, but no response from the server. Like its not hearing the request.

I can ping to ip address and I get request timed out, further checking I found that RAS ignores pings. I saw some where how to make it responde, but cant find that information on the web anymore.

Logs show nothing.

Mark

6 replies

by cg it

Why do you have a router between the Internet and your server? The server with the static IP address from your ISP should not have any problems with VPN connections [even if you have a firewall setup like ISA server and is configured with an allow rule ]. Another question are the VPN clients using PPTP or L2TP when trying to connect to the network? Does the event viewer in admin tools have any warnings or alerts concerning RRAS? Are the clients AD accounts setup to allow remote access [either dialup or VPN?]. Have your tried to re-configure and reset the RRAS VPN ports in RRAS? You might want to just reboot the server and see what pops up on the event viewer in System log or application log concerning Remote Access.

by mlessard

Thanks for your reply, I don't have the linksys router in between the server and the internet. The router is used on the existing lan side. I have 2 cable modem connections one one the lan side, and one directly connected to the server's second network card. Main reason I trust the router as a firewall better than the server. I agree the vpn server should accept clients, but it doesn't. The clients are trying to use pptp, i have removed the L2TP from the available connetion types, on RRAS. I was getting a certificate Message in Event so I removed them. No messages listed in event viewer, other than stated above. Nothing to configure on the miniwan ports/vpn/pptp that I can find. I have users settings set for dialup access, in AD. I have rebooted the server 2 dozen times. Again nothing shows up in event log related to RRAS. Any additonal ideas.

by dwdino

with two network cards you need to verify that RRAS is listening on the appropriate device. If it is listening to the LAN side, then no clients will be serviced.

by mlessard

Ok, it is possible, but how do you check which is listening?,in RRAS setup it asks which network card is the lan side, which I have set properly. Am I missing something in the security side of things with active directory?

This discussion is closed to new replies.