Discussion Locked

W2K Trust

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I like to have trust relashionship between two domains located in different subnet and gateway. These two locations are connected by VPN. When I try to do the trust using the active directory domain and trust, I get error message " The xxx domain canot be contacted" How can I work around these problem?

5 replies

by netlion

I have found they can find each other if the 'PDC Emulator' for each domain is entered into DNS manually for the opposite domain. Example: Domain A's DNS will have an entry for Domain B's DC that has the PDC FSMO. Domain B's DNS will have an enrryfor Domain A's DC that has the PDC FSMO.

by d.walker5

Ed Isaacs' answser is perfect, I just will add FYI this problem occurs if the domain controller where the trust is being configured cannot resolve the IP address of the primary domain controller (PDC) in the other domain.

The solutation is to have the WINS, DNA,or the LMHOSTS file configured correctly to locate the PDC, and that TCP/IP is configured correctly on all of the domain controllers that are involved.

This discussion is closed to new replies.