Discussion Locked

Wave sound and hybernation.

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

One of our laptops (Mitac 5033) has Win 98 installed. Both with the win98 driver and the mitac supplied driver, I have the same problem, that is no wave sound at boot up. If i reinstall the sound, it works, but is lost agin at the next boot up. The wierd thing is that if i boot the machine - no sound, if i then press Fn+F12 to put the machine into hybernation, when it comes out of hybernation (Fn) the sound now works perfectly!

Can anyone suggest a way whereby I can get full sound without having to go through this elaborate procedure (the workaround is fine, but I have problems with internet dial up if the machine hybernates with this open).

Many thanks in advance.

Anna Maria

1 reply

by philthegreat

From your last comment on the internet dial up; then I guess your sound card is an integrated chip on board.

1) The driver has some problems, try to find an updated one which has fixed the problems.
(from Mitac's site)
2) Hardware conflict may be related. The handle or IRQ may be shared by some hardware. Check your manual on that. If it is so, it must be re-set manually. I cannot tell you now, without seeing your computer.
Give me more details if the above methods are not helping you.

This discussion is closed to new replies.