Question Locked

wirless card / router issue but both work

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Help....I've spent many days, weeks, months surfing different forums trying to find an answer, but nothing helps.

I have a Vaio with an internal Intel/PRO wireless 2200BG, which has all of a sudden stopped working with my BT Homehub.

Problem with the hub? nope, but just in case I've swapped it out, so here are the issues:-

1. Vaio will not connect with the hub using the internal wirless
2. Vaio will connect with the hub using a USB dongle
3. Vaio will connect with other wirelss AP's, routers etc
4. Hub can connect with my desktop and other laptop

Should also say, that I've updated all software, drivers and firmware

Help...please.....

Thanks,

8 replies

by older mycroft

[i]1. Vaio will not connect with the hub using the internal wirless
2. Vaio will connect with the hub using a USB dongle
3. Vaio will connect with other wirelss AP's, routers etc
4. Hub can connect with my desktop and other laptop[/i]

[b]Are you saying in Point #3 that the Vaio will connect with other AP [i]using the internal wireless[/i] or only with the dongle??[/b]

by kris.kristmanns

@ old mycroft - will connect with the internal wireless

@ robo_dev - I'm currently only using WEP due to the USB dongle software not supporting WPA

@ Rick - thanks :-( was kind of fearing that would be the only ultimate solution. I've tried 4,5,6 and 9. Think I'll give 7 nad 8 a miss if it comes to that go with the USB...will try also 1,2 and 3 and see...

Thanks,

by robo_dev

Do other wireless devices connect to the homehub?

by nepenthe0

I likewise have a VAIO notebook computer with the Intel/PRO wireless chip, and the wireless LAN feature misbehaved right from the start. These are the things I did to keep it alive:

1) Switched to the Intel/Pro driver, which seemed to work better than the Windows driver.

2) Switched back to the Windows driver when the Intel/Pro driver performed erratically.

3) Disabled the WZC Service (Windows Wireless Zero) which interfered with the Intel/Pro driver.

4) Disabled encryption (yes, this helped).

5) Disabled mixed-mode signal broadcasting, assigned [b]G[/b] mode only to the router.

6) Enabled SSID

7) Obtained a vertical booster antenna for the router.

8) Re-attached and re-oriented the notebook antenna for a better connection.

9) Updated the Intel/Pro wireless LAN driver at the Sony Support website to the latest version.

Now here's the part you're not going to like - eventually I just got tired of messing with this shoddy piece of hardware/software, and decided to simply circumvent it.

I no longer power-on the wireless LAN in my Sony notebook. Instead, I stick a Linksys USB wireless adapter into the side port, and my troubles have ceased:

http://tinyurl.com/3vs8r7

So do yourself a favor, and adopt the philosophy espoused in Chicago and New York: [i]fuggedaboudit[/i]. Use Linksys and be happy.

Rick/Portland, OR

by kris.kristmanns

@ old mycroft - will connect with the internal wireless

@ robo_dev - I'm currently only using WEP due to the USB dongle software not supporting WPA

@ Rick - thanks was kind of fearing that would be the only ultimate solution. I've tried 4,5,6 and 9. Think I'll give 7 nad 8 a miss if it comes to that go with the USB...will try also 1,2 and 3 and see...

Thanks,

by jesusjones

I've had problems between both of these on Dell and Sony Vaio laptops and ended-up circumventing with a USB or PCMCIA wireless card too. The sony would BSOD on startup!

by oldbaritone

with Intel 2200 in a Dell Latitude D600.
Linksys dongle works great, no more headaches.

This discussion is closed to new replies.