Community archive

Ask something
Discussion Locked

x25 configuration in nt server.

0 helpful
1 reply

by chetanpanse

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all.
I had a server crash in nt 4.0 server which was running a leased line connectivity.Everything is up except the x25line. I have a card of eicons51 and taicom ntu128 modem. The modem connects to the card with db25pin.I have drivers of the card and i have configured the card. It takes the card as eicon wan adapters. but the card is not able no detect the modem. The ras cant understand which is the modem.There are no drivers for the taicom 128 model at the web site. The technical personof taicom says so.So i am not able to configure the modem at all..
Pl help. mail me at chetanpanse@hotmail.com

1 reply

by luyasu

It's been a while since I've worked with the x.25 protocol. I last used on a x.25 pad until 1999.

Use the EICON driver for NT 4.0. It works, but you will need to reapply your latest SP.

Ensure modem is up and await the server reboot.

Let meknow!

TSP

This discussion is closed to new replies.