Discussion Locked

XP as part of triple boot

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi
I wish to set up my machine to triple boot Windows Me, 2K Professional and XP professional. I have created partitions C, 1.7 Gb, primary; D, 2.2 Gb, logical; E, 3.5 Gb logical to install the O/Ss, the rest of the disk in 2 logical partitions about 16 Gb each for apps, data etc. I install the O/S in the order Me, 2K (SP2), XP, and use the MS boot loader. On installation, everything is OK, booting to any of the 3 O/S. If I change XP in any way, though, eg. install a printer driver or just deleting windows wallpaper, then Me and 2K boot with no problems, but when I try to boot XP it reaches the loading screen and then hangs. I can boot in safe mode, but even a system restore to that saved on original installation of XP does no good. I have tried booting to create a boot log, but this doesn't seem to work either. I have tried reinstalling XP 3 or 4 times, and still get the same problem. Can anyone offer any advice or tell me what is happening ?
PII 333
ASUS P2B M/B
256Mb SDRAM
40 Gb Western Digital HDD
Promise Ultra 133 TX2 controller
MS optical mouse (USB)
HP 970 CXi printer
Epson Perfection 1240U scanner (USB)
Wacom Graphire 2 tablet (USB)
Zip 100 drive (through added parallel port)
Creative Labs TNT2 Ultra card
S/B soundcard
External Rockwell modem
TIA
Stuart

2 replies

by thechas

I see 1 flaw in your stratagy.
The 16GB shared applications partition.
The way many applications work, you just cannot share a single application install between 3 operating systems.

I would change the way the drive is partitioned, and give each OS 6 - 12 GB, and perform a seperate installation of each application program in each OS, and make sure that it is storring all files on the drive that the current OS is installed on.

As to the specific problems with hardware drivers and XP, I suspect that they are placing files on the C: drive, and not the XP partition.

You might try hiding the other 2 OS drives while installing device drivers in XP.

Go to Administrative Tools, Computer Management, Disk Managment; to disable a drive.
I believe that you can also diable drives from one of the sections of the TweakUI power toy.

Chas

by stuart.crow

Thanks for the reply. Since then, I have bought Partition Magic 7, and use Boot Magic 7 to boot. I reformatted and reinstalled everything again, using Boot Magic to hide the partitions I was not installing on to. I still get the same problem, though. Apps on the app partition are installed from each O/S so they all work fine.
Stuart

This discussion is closed to new replies.