Discussion Locked

XP Client drops off NT4 Network

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an XP Client on an NT4 Network, SBS 4.5 to be precise.
The client connects to the network but then drops off. This happens erratically.
The client will only connect with a fixed IP address.
If the client machines IP address is changed to dynamic and then changed back to fixed then the client will reconnect to the Network.
The NT Server is only running TCP/IP and NetBEUI.
The XP Client is running TCP/IP, IPX/SPX
It also has QOS installed in networking.
WHY IS THIS HAPPENING and what is the solution. MS are being hopelessly unhelpful
PLEASE HELP

5 replies

by timwalsh

On the client, remove IPX/SPX. It's only needed if you are connecting to a Novell network. I would also remove QOS. I haven't been able to discern its worth in a small networking environment.

Also check all your Power settings for the NIC. Bydefault, XP enables a NIC setting that will "Allow the computer to turn off this device to save power." This setting can be found at Control Panel | Administrative Tools | Computer Management | System Tools | Device Manager | Network Adapters | Properties for your NIC | Power Management tab.

by Member 30543440

If You use DHCP - check the range of addresses You provide and a lease expiration time.

in addition, You have a network notification icon on a taskbar -
Does it say - network unplugged, when dropped?

Thanks
David

This discussion is closed to new replies.