Image 1 of 13
OtterBox Tandem Series for Palm Pre Plus
Palm devices, particularly the Treo line, was popular with field workers and now with the Palm Pre Plus being used by current Palm users a rugged case was needed. OtterBox recently released their new Tandem Series that provides adequate protection in a fairly slim form factor.
Back of retail packaging
Both sides of the Palm Pre Plus OtterBox case are visible in the plastic retail packaging.
Retail package contents
Inside the package you will find front and back case pieces, screen protector, installation card, instructions, and screen cleaning cloth.
Upper back of OtterBox case
Here you can see there are openings for the camera and flash along with a large speaker opening.
Back of OtterBox case in hand
The case has OtterBox branding on the back and as you can see adds very little size to the device.
Top of the OtterBox Tandem Series case
There are openings in the case for the 3.5mm headset jack and mute slider switch.
Left side of the Tandem Series case
This left side view shows the volume buttons and two piece case design.
Bottom of the OtterBox case
There are no openings on the bottom of the case and you can see the two parts of the case.
Right side of the Palm Pre Plus case
The right side has an opening for the microUSB port, which is important since the Touchstone charger does not work when the Palm Pre Plus is in the case.
Bottom of the top piece
This photos shows the top piece mounted on the display that still gives you room to slide the display up and access the keyboard.
Side view of the Pre Plus inside the OtterBox Tandem case
The case has top and bottom pieces that snap securely around the Pre Plus.
View of the upper part of the Tandem Series
There is a small ridge around the edges where the case wraps around the Pre Plus.
OtterBox Tandem Series in hand
The closed Pre Plus does not have added bulk in hand.