Motorola XOOM: In the box

ntAs of this writing, the Motorola XOOM is available in the U.S. for $599 (with a 2-yr contract from Verizon) or $799 (with no contract). It runs Google’s Android 3.0 (Honeycomb) operating system. The first XOOMs are 3G models, but Verizon plans to offer an LTE 4G upgrade. Once we begin dissecting the device, you’ll see how.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Opening the box

ntThe Motorola XOOM weighs 1.6 lbs. and measures 9.8 x 6.6 x 0.5 inches.
nt
ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Accessories and Product Documentation

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Box contents

ntInside the box, we find the Motorola XOOM tablet, USB cable, power adapter, and product documentation.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: WIth protective screen film in place

ntThe Motorola XOOM has a 10.1-inch, touch-sensitive display. The clear plastic film that protects the screen also tells you where important components (such as the volume buttons and Webcam) are located.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Front

ntThe Motorola XOOM has a 10.1-inch WXGA display that supports a 1280 x 800 resolution. On the front of the device, you’ll find the 2MP Webcam, Webcam indicator LED, notification LED, and charging LED.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 2MP front-facing Webcam

ntHere’s a closer look at the Motorola XOOM’s 5MP, front-facing Webcam and associated indicator LED.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Back

ntOn the back of the Motorola XOOM are the external speakers, 5MP rear-facing camera, camera flash, and power/lock button.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: External speaker grill

ntHere’s a closer look at the Motorola XOOM’s external speaker.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 5MP rear-facing camera

ntHere’s a closer look at the Motorola XOOM’s 5MP rear-facing camera, camera flash, left-side external speaker, and power/lock button.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: SIM card and microSD card slots

ntThe Motorola XOOM has a single opening for the device’s microSD card and SIM card slots. Both slots are filled with dummy cards made of clear plastic. According to Motorola documentation, neither can currently be used. The SIM slot will be used once the device is upgraded to LTE 4G and the microSD slot will be activated with a future software update.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Top edge

ntIn addition to the SIM card and microSD card slots, the Motorola XOOM’s headphone jack is located along the top edge.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Left edge - volume up/down buttons

ntAlong the left Motorola XOOM’s left edge are the volume up and down buttons.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Bottom edge

ntAlong the Motorola XOOM’s bottom edge are the Micro USB port, HDMI port, and power adapater port. There are also two Torx T5 screws, which we’ll need to remove in just a moment.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the external case screws

ntThe first step in opening the Motorola XOOM is removing the two Torx T5 screws located along the bottom edge. Luckily Motorola didn’t use any security screws–like the annoying pentalobe screws Apple is using on several devices.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: External case screws removed

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Sliding the case open

ntWith the two external case screws removed, you can slide the back cover down about two inches. Internal catches prevent the cover from sliding completely off.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Releasing the back cover catches

ntUsing a plastic spudger or thin metal blade, you can release the internal catches the prevent the back cover from sliding all the way off.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Back cover removed

ntOnce the internal catches are released, you can slide the back cover away from the Motorola XOOM internal frame.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: First look inside

ntWith the back cover removed, we get our first look inside the Motorola XOOM. We can already see the large battery and part of the main PCB.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the speaker and rear-facing camera cover

ntWith the back, metal cover removed, we’ll turn our attention to the plastic cover that protects the rear-facing camera, speakers, flash, and power/lock button. Two Torx screws hold this plastic strip in place.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Volume up and down buttons ribbon cable

ntEven with its two screws removed, you can’t lift the plastic cover away from the Motorola XOOM’s internal frame just yet. A thin ribbon cable for the volume up and down buttons (right side) still connects the cover to the main PCB.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Disconnecting the volume buttons' ribbon cable

ntUsing a plastic spudger, I disconnected the volume buttons’ ribbon cable from Motorola XOOM’s the main PCB.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Thin plastic cover removed

ntWith the thin plastic cover removed, the Motorola XOOM’s main PCB is completely exposed.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Thin plastic cover

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Back covers completely removed

Motorola XOOM: Removing the battery screws

ntThe battery is held to the Motorola XOOM’s internal frame with 12 Torx T6 screws.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the battery connector screws

ntThere are another two Torx T5 screws holding the battery connector to the main PCB.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Disconnecting the small battery connector

ntBefore removing the Motorola XOOM’s battery, you’ll also need to detach this tiny connector, which is attached to a pair of very thin red and black wires.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Remvoing the battery

ntWith all the screws removed and the connectors detached, you can lift the Motorola XOOM’s battery away from the internal frame.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 7.4V 24.1 Wh Li-ion battery

ntThe Motorola XOOM has a 7.4V 3250 mAh 24.1 Wh Li-ion battery.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Battery - back

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: With the battery removed

ntWith the battery removed, we’ll turn our attached to a small card witout any chips. This appears to a placeholder card for the LTE 4G upgrade that Verizon is promising for the Motorola XOOM.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the LTE 4G placeholder card screws

ntThe LTE 4G placeholder card is held in place with a pair of Torx T5 screws. two antenna wires are also connected to the card.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the LTE 4G placeholder card

ntWith the screws removed and the wires disconnected, you can lift the placeholder card away from the metal frame.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: LTE 4G placeholder card removed

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: LTE 4G placeholder card - Top

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: LTE 4G placeholder card - Back

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Disconnecting the 5MP rear-facing camera

ntWe’ll turn our attention to the cameras next. First, we’ll remove the rear-facing 5MP camera. It is connected to the Motorola XOOM’s main PCB via a black plastic spacer and very thin ribbon cable.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 5MP rear-facing camera removed

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Disconnecting the 2MP front-facing Webcam

ntAfter removing the Motorola XOOM’s 5MP rear-facing camera, we’ll disconnect the 2MP front0facing Webcam.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 2MP Front-facing Webcam removed

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 5MP rear-facing camera - front

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 5MP rear-facing camera - back

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 2MP front-facing Webcam - front

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: 2MP front-facing Webcam - back

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Left-side external speaker

ntNext, we’ll remove the Motorola XOOM’s external speakers. Each speaker is connected to the main PCB with a small, black connector.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the left-side internal speaker

ntWith the speaker’s connector detached, you can lift the speaker away from the Motorola XOOM’s metal frame.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Motorola XOOM: Left-side internal speaker removed

ntA thin adhesive film holds the speaker to the frame, but you sould be able to remove the speaker without completely removing the film.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the right-side external speaker

ntTo remove the Motorola XOOM’s right-side speaker, use the the same process as on the left.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Right-side external speaker removed

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Antenna wires

ntBefore we can remove the Motorola XOOM’s main PCB, we’ll need to disconnect the antenna wires that run allong the top edge.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Antenna wires disconnected

ntThe Motorola XOOM’s antenna wires are held to the main PCB with metal clips. You can easily pull the wires out of the clips and away from the circuit boad. The wires will remain soldered to a contact plate attached to touchscreen’s bezel.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the main PCB screws

ntWith the placeholder LTE 4G card, speakers, and antenna wires, removed, we can begin removing the screws that hold the Motorola XOOM’s main PCB in place.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Detaching the ribbon cables from the main PCB

ntAfter removing all the main PCB’s screws. You’ll also need to detach several cables.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Detaching the display cable from the main PCB

ntYou’ll also need to detach larger cables, such as this one for the Motorola XOOM’s display.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Removing the main PCB

ntWith all the screws and cables removed, you can lift the Motorola XOOM’s main PCB away from the internal metal frame.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Display assembly and internal frame

ntMore than a dozen screws and adhesive hold the Motorola XOOM’s front panel to the metal frame and display. As you can see the touchscreen’s controller chips without removing it from the display assembly, I decided to leave it in place. I want to put this unit back together in complete working order.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Atmel touchscreen controller chips

ntThe Motorola XOOM’s touchscreen uses an Atmel mXT1386 controller with markings MXT1386X ES-U 1035I TH 0P2110.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Main PCB - Front

ntLooking at the top of the Motorola XOOM’s main PCB we can’t see any of the chips. They’re all hidden beneath metal shields, and unfortunately the shields are soldered to the PCB. As I want to reassemble with XOOM in working order, I’m not going to risk damaging the chips or their contacts by cutting the shields loose.

n

ntLuckly, our friends over at iFixit did go through the painstaking process of removing the shields. So, we know that hidden under the shields are an Nvidia Tegra T2 dual-core CPU, Broadcom AGPS, Broadcom Wi-Fi, Bluetooth 2.1, and FM Tuner, Qualcomm HSPA+ chip and Samsung DRAM module.

n

ntFor a closer look at the chips, check out iFixit.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Main PCB - Back

ntJust like the shields on the front of the main PCB, those on the back are soldered in place. Again, iFixit comes to the recue. Under these shields, there are chips from Qualcomm, Atmel, Toshiba, and ST Ericsson.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler

Motorola XOOM: Disassembled

ntOverall the Motorola XOOM was very easy to disassemble. It has standard Torx T6 and T5 screws. The XOOM also feels like a sturdy and well constructed tablet. And, it should be for $800. Unfortunately, it’s unlikely that you’ll be able to get spare parts for XOOM anytime soon.

n

ntPhoto by: Bill Detwiler / TechRepublic
ntCaption by: Bill Detwiler