Torture-Testing: Storm Case iM2370
Image 1 of 18
Drag test
View this image gallery of the Storm Case iM2370 being torture tested.
Crush test, different view - See how the case has deformed severely under the weight of the vehicle
After the crush test - the lid is still pretty deformed, but that's not a vacuum inside the case causing that, it's the shell that's bent
After the crush test - the lid is still pretty deformed, but that's not a vacuum inside the case causing that, it's the shell that's bent
After a little while the deformed lid returned back to normal - notice the damage from the drag test
After a little while the deformed lid returned back to normal - notice the damage from the drag test
Closer look at the drag test damage
Here's the cliff where the drop test was carried out - that's a 75 foot drop down to the shingle
Another view of the cliff ...
Here's the Storm Case iM2370 going over the cliff for the first time
The aftermath of the first drop - not much additional damage
Aftermath of the second drop - this time it has an egg inside ... but did it survive?
Yes, amazingly it did!
Closeup of the lucky egg
Here's how the case looked after the second drop
The one's that weren't so lucky during the drop test ...
And the ones that did very well ...
The simulated rain test
After 1 hour of soaking
Seals leaked allowing water into the case
By
Adrian Kingsley-Hughes
-
Account Information
Contact Adrian Kingsley-Hughes
- |
- See all of Adrian's content