Windows Forum

Ask something
Discussion Locked

Failed Mirrored Set

0 helpful
5 replies

by kimtronic43

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I had a mirrored set on disk 0 and disk 1. Disk 1 fails, and I add a disk from another server's volume to repair the mirror. What should I do to fix the mirrored set?

5 replies

by larrys

I guess I am at loss as why would you ever take a drive out of another server to repair a failed drive. If your disk 1 fails put a new drive in it's place and rebuild the mirror using DiskManager, works well. I have had disk 0 fail and did the same thing with one difference I had to make Disk 1 Disk 0 for the boot disk. Remember to mirror your drives the new drive must be blank clean and be the same size or larger.

by larrys

I guess I am at loss as why would you ever take a drive out of another server to repair a failed drive. If your disk 1 fails put a new drive in it's place and rebuild the mirror using DiskManager, works well. I have had disk 0 fail and did the same thing with one difference I had to make Disk 1 Disk 0 for the boot disk. Remember to mirror your drives the new drive must be blank clean and be the same size or larger.

This discussion is closed to new replies.