Hello everyone, new to site, i have a 1720 cisco router with a ADSL wic card,the router with the version it has was able to do all the configuring for vc mode (atm-vc-if)(saw it and did it myself)?? Now the problem i did a reload on it (yes without backing it up like a dummy), after the reload it will not take any pvc mode or DSL commands, even said it in the show diag when i did it, is there any commands i have to enter to get it back or do i have to download something–i am lost, please help from anyone would be great, thanks alot– BOE– The Show version is Cisco Internetwork Operating System Software
IOS ™ C1700 Software (C1700-K2SY7-M), Version 12.1(5)YB4, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 03-Jul-01 19:41 by ealyon
Image text-base: 0x800080E0, data-base: 0x80B3540C
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-K2SY7-M), Version 12.1(5)YB4, EARLY DEPLOYMENT RELEAS
E SOFTWARE (fc1)
Router uptime is 2 days, 8 hours, 36 minutes
System returned to ROM by power-on
System image file is “flash:C1700-K2SY7-MZ.123-7.bin”
cisco 1720 (MPC860) processor (revision 0x601) with 24576K/8192K bytes of memory
.
Processor board ID JAD051707U5 (4023631964), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
–More–
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
thanks again Boe
