2 nic in one hubs

if you are using linux - use masqureding

if you are using 2k - set up that nic to see multiple addresses.

If there is two devices, use static for both

Can you please rephrase the question? There is not enough information in your question to accurately discern a solution.

Regards,

Colesky

use 2k ,
cable modem to router
router to hubs
2 nic into hubs
a) ip : 202.66.133.xxx
subnet : 255.255.255.224
gateway : 202.66.133.xxx
dns : 202.xxx.xxx.xxx
b) ip : 192.168.100.1
subnet : 255.255.255.0
gateway : 192.168.100.1
dns : 192.168.100.1
pls , how to config network address ???????

don't connect two nic's to one hub connect one nic to directly dsl router or router. connect the other nic to hub and do what ever u like.

1. why we have to connect one directly to external connectivity, because the internal machines does't needto expose to outside world. so that it gives u security also, and if any one using the same ip address in the public network then there should be problem. we usually do it, directly connecting to server or configuring two switch/hub for public and prive networks.

i hope this solve your problem.

This question was auto closed due to inactivity