Windows Forum

Ask something
Discussion Locked

2 pci bus

0 helpful
3 replies

by waltervw

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
my old hdd which i inserted in my new pc reports 2 pci bus(code 2).my new pc has onboard vga sound & lan. How can i install the drivers?.Did delete pci in d/manager but when pc starts i get the same message in d/manager.Tried to install drivers withadd h/ware, but pc detects old settings.I.m running windows 98 -ugrade from win95.

3 replies

by danpiers

If you plan on using the on-board vga, sound, and lan, you must make sure that you did not transfer these cards from the old system to the new one. Then, I recommend that you remove the entries for the older ones from the d/manager. Asuming that you got a motherboard CD-ROM with your new pc, you will need to load the drivers for these functions from this CD-ROM. This may take a little searching on your part, because the drivers you will need are sometimes buried under several layers of folders. If you are really lucky, the CD-ROM will autoplay and give you a menu for driver installation. It is important that you load the "interrupt" or "miniport" driver first...this will make subsequent drivers load with less problems. Good luck.

This discussion is closed to new replies.