Question Locked

2nd SATA Hard Drive unallocated in Vista

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a new machine running Vista and have got around any problems OK so far. My main issue is that I have a Seagate SATA hard drive full of files that is not fully recognised in Vista. This was my storage hard drive on the previous WinXP machine. Vista sees the drive, but lists it as unallocated and I cannot access the info on it. I know I can repartiiton it, but I need to access the files it contains without deleting any.
Can anyone help please?
Thanks.

11 replies

by hal 9000

Just read up on the Help Pages but a warning here once you Import the Drive into Vista it may not be possible to read it in any other version of Windows.

Col

by synthsapien

but ti seems to be for drives listed as 'foreign'. My drive is listed as 'unallocated', even though I know there are lots of files on there... or at least should be(!)

I've also tried Seagates Discwizard and Handy Recovery, but neither see the drive at all. Am I left with trying professional services?

by hal 9000

But you need to have access to a computer with an OS that this drive worked under previously to see if it's actually still Formatted Properly or if something has happened to it when it was attached to a Vista Machine or Upgrade.

If you can pull this drive fit it to a USB Caddy and try it on a XP computer and it works you have a Vista Problem which is quite common as it doesn't want to recognize Drives that it didn't format. This is part of it's so called Security.

If this drive was in a computer that was upgraded it's possible that Vista scrapped the MBR's though highly unlikely but it is possible so you need to test it on a XP machine before doing anything else as Vista has a habit of telling you lies.

Well actually anything M$ lies to you but Vista has taken this to a new level with HDD's that are attached to a Vista Computer. Quite often Vista refuses to see any formatting on a drive that it hasn't formatted. This is common on a upgrade where you have more than 1 HDD installed Vista will see the Boot Drive but nothing else and insist that the extra drives are blank unformatted drives when they are perfectly OK with a NTFS Partition and Data on them intact.

So as you have a problem here you really need to look at testing the drive on a system that will work instead of a new untested OS that has no known features that are stable and what doesn't work reliably.

Col

by sgt_shultz

can't you get the drive to another pc running xp? or dual boot xp on that box? i haven't see anything about this problem. what is your drive model and mfg please?

by synthsapien

it didn't work. I pulled the drive, put it in a caddy and connected it to my laptop which is WinXP SP2 and it said exactly the same.
Does this indicate that the drive has been formatted somehow??

by hal 9000

Options are On Tracks EasyRecovery? Professional you can look at the specs here

http://preview.tinyurl.com/kdeu

Or a cheaper option Spin rite available here

http://preview.tinyurl.com/8p4ex

Both work fairly well but my first option would be the On Track as it's got me out of trouble so many times, but many people swear by Spinrite so it's your choice.

The most likely thing that has happened here is that the MBR's have been messed up and are making the drive unreadable both of the above should reconstruct the MBR's without a problem.

Col

by philipp.jaeggli

I had exactly the same problem and was able to solve it with a freeware-tool called TestDisk: http://www.cgsecurity.org/wiki/TestDisk

Somehow installing Vista must have scrambled the 2nd drive's master boot record. I was able to recover the whole disk as if nothing had happened with the "write MBR" function of TestDisk.

I hope that this helps anybody who happens to find this thread like me.

by lbos2

Get the drivers for your hardrives from the hardrive makers and have it ready when you reinstall vitsa when vitsa ask you to load your drivers load them. all your old files will be placed in a directory named windows.old you will then be able to copy your old files fromt here

This discussion is closed to new replies.