General discussion

Locked

A fatal Exception OE!!!

By kvee ·
Dear Sir,

i have a problem that started last week
that is when i use the hyperterminal program to connect to a specific hardware, it will come out with the blue screen of death. it says

A fatal exception OE has occured at 0028:C02A20CC in VXD VWIN32(05) + 00000BF4.
The current application will be terminated.

Please help, i have tried removing the Hyperterminal program and reinstall it but the problem still there.
thanks for this great website, it help me a lot.

This conversation is currently closed to new comments.

6 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

A fatal Exception OE!!!

by dmiles In reply to A fatal Exception OE!!!

You are getting an instruction error that is being caused by conflict that has to do with drivers,yet research did not give any specfic resolution,the closest is Microsoft knowledgebase article Q187214 and Q189655

Collapse -

A fatal Exception OE!!!

by kvee In reply to A fatal Exception OE!!!

Poster rated this answer

Collapse -

A fatal Exception OE!!!

by Another Butthead In reply to A fatal Exception OE!!!

VWin32.vxd is a Windows to DOS driver. Windows uses it to access DOS commands for certin devices. A modem for example. It may be conflicting with you modem drivers. Try downloading the latest device drivers, reloading the current drivers, or removing the whole thing and letting Windows find it again. If you loaded USB drivers after the Modem drivers, that can cause this. Try unloading them and reloading them.

Collapse -

A fatal Exception OE!!!

by kvee In reply to A fatal Exception OE!!!

Poster rated this answer

Collapse -

A fatal Exception OE!!!

by randaziz In reply to A fatal Exception OE!!!

i think that this a register related problem try this :restart your comp.in dos,then go to the windows dir.and type scanreg/restore.> tehn u can choose one of the five good copies of the register.i hope that will help.

Collapse -

A fatal Exception OE!!!

by kvee In reply to A fatal Exception OE!!!

Re...FE OE

i will like to address to the problem that was stated above that is the Hyperterminal "fatal execption OE". what i have done so far for few weeks is searching around finding solution without reinstalling the Win 98, tried all of what iknow, ideas from friend, from internet and all sort but nothing turns out as what i hope. the (scanreg/restore) that run on dos didn't contribute much but help me solve the other problem like one of my pcs always have this reg error so it help me alot. well come back to this you can download the fix file at
<http://www.microsoft.com/technet/treeview/default.asp?url=/technet/security/bulletin/ms00-079.asp>

Back to Windows Forum
6 total posts (Page 1 of 1)  

Related Discussions

Related Forums